Application Hub · Grade Selection
Specialty & Emerging Materials
Functional diamond for coatings, electrodes and engineered composites.
Sub Applications
Solutions In This Category
Beyond abrasives, diamond is bought for what it does inside a material rather than what it removes from a surface: wear resistance in coatings, conductivity in electrodes and mechanical reinforcement in composites. These applications are specified by function, so we develop the grade against the end property.
Diamond Grit For Sandblasting And Shot PeeningRegular-shape monocrystalline grit for metal surface treatment, mould texturing and shot peening — 4–8 µm fine and 36–54...
Diamond Powder For CVD And Composite CoatingsMicron diamond for seeding and reinforcing CVD and polymer composite coatings on cutting tools and moulds — 2–40...
Diamond Powder As A Ceramic And Coating AdditiveFine monocrystalline micron powder for water-based ceramic wear coatings, ceramic filter machining and ceramic 3D printing — 1–3...
Diamond Grades For This Category
| Process step | Grade direction | Size range |
|---|---|---|
| CVD and composite coatings | Micron powder for seeding / reinforcement | 2–40 µm |
| Wear-resistant coatings | Micron powder for cookware and polymer systems | 1–3, 5–10 µm |
| Boron-doped diamond electrodes | Boron-doped powder | Custom specification |
| Ceramic and polymer additives | Micron powder, treated surface | 1–3, 2–4 µm |
| Sandblasting and shot peening | Coarse grit, impact-graded | 36–54 mesh, 4–8 µm fine |
| Abrasive sponge and scouring media | Fine grit for polymer bonding | 325/400 mesh |
Selection Notes
How To Choose The Right Grade
- Define the property you are buying — hardness, conductivity or thermal transfer — and we grade against that property.
- For coatings, dispersion and surface chemistry usually decide performance long before particle size does.
- Emerging grades are developed against customer samples; send the target specification and we run the trial batch.
Inquiry
What To Include
Start from the application requirement. We will help narrow the grade, particle size and packing route.
1Target function (wear / conductivity / reinforcement)
2Host material or coating system
3Volume and development stage
4Any specification the end customer has set